Gold True Metalic Tutorial on Angron.

 Today I will show you how I paint a True Gold Metalic. 

 It is very simple tutorial step by step, but effect is on highest level :) 

 This is only Gold tutorial, the beauty of mini you will see when it will be finished :)

 Let's start! To paint True Gold Metalic like Camelson you will need paints:

 - Vallejo Model Color Laton Brass 70801

 - Citadel Bestial Brown or Mournfang Brown (new GW's paint)

 - Citadel Rhinox Hide
 - Citadel Sotek Green 

 - Any black paint :)

 - Any white paint :)

 - Citadel Elf Flesh 

 - And old Citadel INK Chestnut Ink. But you can replace it with  Devlan Mud wash also from GW. Techniques I used: Drybrush, Washing, Glazing and also simple painting :)

 Prepare model to paint and basecoat. I always use Black spray from Citadel - Chaos Black. 

 First layer: painting whole mini with Rhinox Hide. 

 Simple wash with Black paint, proportions about 25% Paint 75% water. Thoroughly whole mini. 

 When wash is dry, we will use Gold paint first time :) it is thin, gently layer of gold, I made it with drybrush method. 

 Now we wash whole mini with mix of black and bestial brown 50-50% :) and 25% Paint mix and 75% water. 

Next step is hard drybrush with only gold paint :) Thoroughly on whole mini! :) 

 Now is first shading with Bestial Brown, on pic you can see what areas of armour were glazed :) 30% paint and 70% water. 

Another glaze with Bestial Brown, and another with Rhinox Hide. You must do deeper shades. Few layers. 

 And more shades with Rhinox Hide, and Black Paint. 

 Now I used Chestnut Ink from GW, it is really old, so probably lot of you don't get this one :) but don't panic :D you can use new wash Devlan Mud with drop of water :) 

 Now after washing we must do a Black Lining. You must gently do a thin line with black paint, everywhere where you must separate every single parts of mini :)

 Compare pictures from last step with pictures from this step :) it is big difference :) 

 Also on this step before black lining, I blend some Strek Green on corners of shoulder pads, and in middle shades. It is good colors saturation :) 

And also little battle damages on shoulder pads. 

 Here we will do last shades with Rhino Hide and black paints. 

Now we start to do edges of Gold Armour with Elf Flesh. Every edge and areas near black lining, we must made a thin line with Elf flash. Also battle damage :) 

 This is last step when we correct edges. Also on highest points of armour and rivets we must do a little point of white paint to highlight armour :) This is finish of the armour by Camelson. :) 

 If you like it, please share it with friends, and everywhere where you can! :) That is all for a now :) 

 Finnal effect when whole mini will be painted will be much better :) I still learning to do Tutorials, so please be gently :)