After the last little disaster I rebuild the ammo drum, now in the proper width :)
And while the PC around the drum cured I added rivets and ornaments to the rest of the gun.
Next up was the ammo feed. For this I cut a 1cm wide strip of 0.5mm PC and wrapped it around a pencil (to give it a round shape)
For the "ammo" I cut 3mm wide stips of 1.5mm thic PC
I glued these onto the strip with slight gaps between them.
Once the ammo drum was cured, I added two small stips of .25 PC for the ornaments.
When the ornament strips cured I finally mounted the drum to the main axle.
One thing I realized is that the axle I used this time was rather thin (compared to the rod in the original gun) and it has a tendency to bend....
While the drum cured on the axle I prepared the connection to the ammo feed.
In between these steps is always time for some rivets :)
Another needed ornament is the Fleur-de-lys for the front of the ammo drum.
Finally I mounted the ammo feed to the gun body and the ammo drum.
And with this the NEMESIS twins are completed :)
Yeehah!
But I'm not 100% happy with the position on the deck....
I will have to wait until I have the 4 manouver engines and rotors on the central stubby wings before I can decide where I will position those two babies.
I hope you enjoyed this little build :)
Cheers
Cheers
Klaus