HELLO and welcome back from summer holidays!!!

As soon as i got back from vacation, i immediately started to work on my next model, the Ravenwing Librarian.

I wanted to break out of the standard, and i decided to create a jetbike instead of a regular motorcycle ...

I opened one of the three boxes of bits looking for an idea to start the project...


...and the first thing i noticed was the frame of a Dark Eldar Jetbike so i decided to start this mad project :)


Since the frame was very short i cut the air intake in order to add other components, and make the model a little bigger...


I built the handlebars and instrumentation using a Space Marine Auspex and the handle of heavy weapons


After that i glued a vox caster as a support for the ravenwing shield and i applied the handlebar previously built



At this point i cut a dreadnought bit and some eagle symbols from imperial city sprue and i glued everything in front of the jetbike frame and i also added a book from ravenwing upgrade sprue





I built the jetbike bottom using a dreadnough cable and a panel from a cyclone missile launcher


The librarian head comes from gray knights sprue...

After i've built all main components i fixed everything with adhesive mastic to see how it looks and i added some details and purity seals

(i didn't take pictures but for the rear engine i used a space marines jump pack)

...and that's the result!!!



Now it's time to paint! :D

Thanks for reading!!!!! :)