I figured I also am super scared of doing weathering powders and oils... so why not jump full on and try all these new skills! I'd love to apply it to vehicles and terrain.
I picked up a ton of the Secret Weapon miniatures tiles. I have enough of the clean and damaged urban streets to probably do 12 or 16 feet of gaming tables. I originally thought I could use them for Infinity but the roads are a little too wide. Now that I'm on a Death Korps kick, I thought it would be cool to do them in an urban setting as they're trudging through a bombed out city. I'm also tempted to do a genestealer cult and Deathwatch pairing duking it out in an urban setting.
With that said, I dove in now that the weather is nice. I primed all of the bases black then started with my first couple of spray paint coats. I first started with Rustoleum Self Etching Primer. It's an awesome greyish color with a hint of green. The picture outside makes it out to be way lighter then it is, but you get the idea. I hit all the roads with that in an uneven pattern.
I then masked off all of the roads and hit the sidewalks and concrete areas in a base of the Rustoleum Nutmeg. It'll give me a brownish undercoat that I can layer on the grey.
I kept with uneven coats through that, letting some areas of the black undercoat show through. Here's most of my stack of the tiles I'll now begin airbrushing. I started last night and after a ton of mistakes and learning, I finally got the hang of it.
I worked in the Minitaire Concrete Slab into the sidewalks and then added it into the highlighted areas in the streets after I pulled off the masking. Funny enough the first picture was with the garage door closed at night, and the other two were from this morning. Lighting makes a difference.
I ended up finishing about half the tiles, and got really fast towards the end. Next steps I'm going to work in more earth tones, and figure out if I paint the striping on the streets or do the blast marks next. Then on to the scary oils, washes, and weathering!