The next step is to texture the base. I like to use Modge Podge, because it is cheap and is made for this kind of thing. For the texture itself, I use model train ballast, a fine gravel. After layering it on the Modge Podge, I let the whole thing dry for about half an hour, then apply a second, thick layer on top. This makes for a sealed surface that won't flake off.
 |
| With the first layer of gravel |
 |
| With the second layer of Modge Podge |
Once that was dried, I paint three layers of paint onto the plaster: dark, mid-tone, and light. (For those who are curious, it was Behr's "Adirondack Blue," "French Colony," and "Pixel White.") Here's the final look:
Once that was done, I painted the ground, first with dark brown acrylic craft paint, followed by tan, and then finally bone.
Then, I had a decision to make: what season to make the terrain? With the popularity of Frostgrave, there is a lot more winter-themed terrain out there. I considered a typical Spring/Fall effect, but finally decided to go with snow, in this case Games Workshop's snow flocking.
Finally, I used Hirst Arts mold #230, Clay Tile Roof Mold, to make a small roof for the crypt proper. I attached it, figuring the building was really too small to play inside. I applied three layers onto it, mostly a dark brown, blended up with a dark red. Here's the final look:
I think the final build looks great, and was relatively easy to build. Next time I'm going to try doing the resin infusion into the plaster. Comments welcome!
