After another week or so without any hobby time to speak of, I was finally able to make some time for cutting up little plastic men last weekend, and all the kitbashes I have wanted to do for a while – and couldn’t – seemed to just keep bubbling to the surface, so to speak 
So for today, allow me to share what is currently on my desk:
I. Iron Man
Back in April, when I picked up the AdMech part of the Forgebane boxed set fairly cheaply — and mostly in an attempt to get my hands on the Armiger Warglaives (in order to, eventually, do stuff like this and this). This also had the side effect of giving me another set of Skitarii Rangers/Vanguard, and also another Tech-Priest Dominus. And after a while, I started to experiment with parts from the latter, in an attempt to make yet another high-ranking member of the Adeptus Mechanicus. Here’s what I came up with:
As you can see, the two main ideas here were to turn around the lower body (for a fairly different look, interestingly enough) and to swap in some Kataphron bitz. Both of these ideas weren’t exactly new, but at least it felt as though I might be on to something. The model still seemed a bit too unbalanced, however, and maybe too much like a ship plowing through the waves
But last week I finally had the time to make some serious tweaks to the Tech-Priest and try to work out all of the various kinks. Take a look:
I tried to make him look a bit more grounded in his pose and composition. Plus I had wanted to use that alternate Magos Dominus head with the mitre for quite a while now — and I think it works really well with the more upright pose, compared to the standard Dominus. The top of the staff/axe has also been replaced, mostly to add yet another way to distinguish the new model from my older, mostly uncoverted Tech-Priest Dominus:
I really like how the models share at least half of their parts, yet still look fairly different
In fact, I have made even more tweaks to the model, adding a piece of parchment and coming up with a slightly better setup for that secondary set of arms:
And I think the model is really starting to come together. Some people on the forums pointed out how they thought the new axe blade wasn’t a good fit, but I respectfully disagree with that notion: If anything, that blade always seemed like a poor match for a Space Marine weapon to me, because the blade has this slightly weird look. At the same time, it does seem more at home with the weird arcane tech of the Adeptus Mechanicus to me, plus that censer bit at the center fits the priestly nature of the AdMech pretty well, if you ask me — but this is totally a question of personal preference, of course.
II. Shark Attack
Since it felt so good to be able to get in some hobby time again, I built yet another model, the – provisionally – last member for my true scale Deathwatch killteam, a member of the Carcharodons:
Where the rest of the killteam is Primaris-based (for that look somewhere between classic Mk. VII and the more hi-tech looking Mk. VIII [?!] Deatwatch armour), I wanted this guy to be wearing a suit of bulky, archaic armour, as a shout out to the chapter’s history of long isolation and drifting through the farthest reaches of known space with next to no contact with the rest of the Imperium, so I used parts from one of the plastic Tartaros Terminators, spliced together (rather cleverly, if I do say so myself) with Primaris parts. To give credit where credit is due, however, some of Doghouse’s seminal truescale conversion work was very much on my mind when building the model.
The original idea was to come up with an approximation of Mk. V armour, but I really ended up going for a more general pre-heresy look, to show how the armour might have been repaired and patched up with different parts over time. So touches from several different armour marks are now present, from the Mk. III backpack to the slightly Mk. V-ish legs, leading to a generally archaic look.
I also wanted to convey the feeling that this guy is very much used to wading into the fray of melee, swinging his weapons and making a huge mess as teeth and claws are shattering against his massive warplate. All in all, I am pretty happy with the kitbash so far, with one caveat: In spite of my best efforts, he’s a tad shorter than the Primaris-based models, something that I’ll hopefully be able to distract from with some deft basing
In addition to the guy’s size, there are two small touches that I am not perfectly happy with yet: One, the left shoulder pad is only a placeholder until I manage to source yet another one of those spiffy “new” Deathwatch pads Two, everybody seems to be hating that shark jaw codpiece, so I might have to reconsider that element — it’s actually a bit frustrating, really:Â because it seems like the perfect part to add some chapter-specific decoration, yet the placement is very much the problem: My original plan was to use it on the Marine’s collar, but it seems that would overclutter the head area quite a bit. If anyone has a smart idea, I would love to hear it!
III. Going feral
And finally, another kitbash I have wanted to do for quite a while: A feral worlder based on the AoS Darkoath Chieftain:
It occured to me a while ago that we don’t get to see nearly enough feral worlders in Inquisitorial retinues (I was also heavily influenced by all the sweet “tech-barbarians” appearing in Horizon Zero Dawn, admittedly), and the chieftain just seemed like the perfect base model — there’s a fair bit of a Sláine vibe about the model, and that really made me want to work with it:
When it came to the actual conversion, the stock model was so detailed and delicate that I had to pay attention to carefully bring it into the 40k setting without going overboard, so I limited myself to adding a slightly futuristic touch here and there, via weapons, ammunition or wargear. As a nice side effect, this strategy also allowed me to exchange my least favourite part of the stock model as well – the slightly weird blade of the sword – and replace it with a nice, vicious chainsword courtesy of the CSM Raptors
Seeing how tall this guy is, I think he would make a good follower for the – equally imposing – Inquisitrix Elianu, especially since she looks like she might have come from a warrior culture of some sort herself:
I think the various tokens and trophies scattered around the model also lend themselves well to a bit of a Daemonhunter vibe — I also chose the left hand gripping a severed Tzaangor head for the same reason, as it just seemed to hint at an affiliation with the Inquisitional Ordo dealing with the more daemonic servants of the ruinous powers. There’s also a tech-barbarian style character in John French’s latest book for the Horusian Wars series who was on my mind when I converted the model.
So yeah, that’s it for today. Any feedback you may have is welcome, as usual. And, as always, thanks for looking and stay tuned for more!