After last week saw me complete a World Eaters Dreadnought, today another member of the XII legion muscles his way to the front of the queue — so what is this about?
The recent Chaos Space Marines release has been a bit of a bittersweet affair for me. Sweet, of course, because the models are obviously brilliant, and such a long overdue reworking of some rather ancient kits. At the same time, however, the added size of the new CSM makes a rather big part of my World Eaters look pretty runtish. There’s also the fact that I don’t see myself revamping the entire army anytime soon — or, in fact, ever: I’m not sure I still have it in me to build and paint huge 40k armies, as I am much more interested in smaller, bite-sized challenges like INQ28 retinues or single pieces that appeal to me. And yet I did of course want to get in on some sweet chaotic action — so what was I to do?
The best possible approach was to start by purchasing some new plastic crack, of course, so I hot myself a box of vanilla Chaos Space Marines and Havocs each (I just couldn’t resist the massive, brutal look of the Havocs, even if rules don’t even interest me all that much at this point). And I began some preliminary experimentation.
Now as many of you will already know from firsthand experience, the new CSM are noticeably taller than the older models, and that makes quite a few of my chaos models look rather weird next to the new guys. Unfortunately, this includes a fair bit of my still unpainted stuff. So the first order of the day was to find out which of my more recent (unpainted) chaos models were still salvageable. In order to find out, I quickly poster-tacked together one of the new models to serve as a point of reference:
Keep this guy in mind — we’ll be seeing more of him shortly…
This guy was mostly built straight out of the box — although, as you can see, I couldn’t help adding a Caedere Remissum helmet crest, even at this early hour — more on that particular design decision later…
Using the new guy as a point of reference, I was lucky enough to find some models that might still work.
There’s my WIP Iron Warriors kill team, for starters:
Now this project was started before Kill Team was even a thing (again), so I mostly played it by ear back then, and built models that appealed to me from a visual standpoint. At the same time, I did try to go beyond the look of vanilla CSM with this project, so most of the models (except for the one tester lurking in the back whom you may safely ignore) were mostly based on Chose models from the Dark Vengeance boxed set. And while the models are still a bit shorter than the new CSM, they don’t look too out of place. Two Iron Warriors remain unpainted, but have already been built, as you can see, and after that, I think I’ll be adding a heavy weapons specialist (built from one of the new kits), add a few suitably IW-themed cultists and call it a day. The finished team should hopefully still work well enough. And KiIl Team, with its smaller model count and potential larger focus on individual characters (and models) appeals more to me than standard 40k at this point.
But where does that leave my World Eaters?
Well, the good news is that I found some guys that should still work rather well in this new, upscaled world. Take a look:
Once again, most of these conversions were heavily based on the Dark Vengeance Chosen, so they still work fairly well (even though they are just a tad shorter than the new models):
I also think that coming up with a really cool World Eaters Kill Team (code name “The Hateful Eight”) should be a very rewarding project in and of itself. If that prompts me to keep building and painting World Eaters for 40k proper afterwards, so much the better. But for now, I want to explore the new kits and use them to build some of the best World Eaters I can come up with — at least that’s the plan.
That being said, the new kits turn this into an interesting challenge, because many well established conversion recipes may not work anymore due to the slightly changed scale (many stock arms, for instance, just seem too short on the new models. As do the chaos marauder arms I have used many times to create the classic “bare arm” World Eaters look). So my first little project was to find out how to make the new vanilla CSM look more like World Eaters, so I started to mess around with a couple of bitz:
The good news is that most older helmets and shoulder pads should still work fairly well — this includes some of the older FW shoulder pads (as seen here with the pauldrons from the berzerker conversion kits. They torso pieces from the same kit, however, are right out).
But I also wanted to do something slightly more involved for my first test model, and after looking for a while at a Blood Warrior chest piece, I got a bit more creative:
Some of the new breastplates are still a bit bland, to be honest, so I decided to splice in some Khornate goodness: I carefully cut through the torso front just above the abdomen as seen in the picture above.
The Blood Warrior breastplate (seen on the left) fit with just the slightest fraction of shaving. However, there was a huge gap underneath it that, while not directly visible when looking at the model from the front, still made it obvious that the torso was hollow. So I used a bit of GS to create a small lip, like this:
Then the Blood Warriors breastplate was simply glued on. The GS plugged the gap, and the new torso works really well, what with the cabling on the abdominal section and everything:
Granted, the whole assembly seemed a little less convincing when seen from the side:
But most of this should end up being covered by the arms anyhow — I merely added some GS to create a straight surface for the arms to attach to.
Here’s a mockup of the entire body:
Now I was really pleased with myself at this point about how clever a conversion I had created. However, I only realised after completing this particular conversion that to replace the breastplate like that would have been even easier on some of the other bodies from the kit, because those already have the breastplates and abdominal section separated from the get-go. Oh well, we live and learn… 
Anyway, a short while later, I had my first World Eaters test model made with the new CSM kit:
I think there’s something so malevolent about this guy’s pose — like a predator stalking its prey…
Of course I decided that I would need to get this chap painted right away, so I adapted the colour scheme I had used for my recent Chaos Dreadnought for use on the smaller model and used quite a bit of time to make sure to get the paintjob just right…
Once again, brighter reds and oranges were used both for edge higlights, but also to create scratches and scuff marks, in order to make the armour look pitted and ancient, and to suggest a texture to the whole warplate.
Oh, I also included a shout-out to Wade Pryce’s World Eaters, one of my biggest inspirations when I got back into the hobby: The stylised legion badge was very much inspired by the way Wade used to paint the World Eaters symbol.
Anyway, to make a long story short, allow me to share my first finished World Eaters test model created using the new CSM kit, fully painted and based:
I did decide to include a bit of blood on the chainsword, using Tamiya Clear Red to create the effect:
And here’s another peak at that legion badge inspired by Wade Pryce’s old models:
And here’s a pretty nice shot (if I do say so myself) of the new World Eater next to Argus the Brazen:
Now as for the evolution of my berzerker painting scheme and, indeed, my Khorne berzerkers, I have prepared a little comparison shot to show you the evolution, as it were:
On the left is one of the first Khorne Berzerkers I painted back in 1998 or so, back when the plastic kit was released. These guys still saw use in my modern army, mostly because I was too lazy to replace them. Next in line is the first World Eater I painted when getting back into the hobby after a longer hiatus, in 2010, but using a slightly tweaked recipe. The third guy was an experiment on replacing the – by then OOP – Blood Red with Mephiston Red, but back then I wasn’t quite happy with the effect. And there’s my brand new little guy — maybe this time I have finally managed to nail the recipe? What do you guys think?
I also took a couple of scale comparison pictures, just to illustrate my earlier point about the new kit making most of the classic catalogue look rather tiny. The difference is not equally pronounced between all CSM: For instance, the DV Chosen are just a tad shorter than the new CSM, but it’s not too obvious. Old CSM models, however, just look really awkward next to the new guys, at least if untweaked. Take a look:
Almost a little painful to look at, isn’t it? The new Marine just seems much taller — and indeed he is. Now here’s a comparison with an old model that was nevertheless a slightly more involved kitbash:
This comparison is interesting because it shows off both the evolution of my painting recipe, as well as the fact that the legs from the new kit are quite a bit longer, the torso is broader, and the backpack no longer dominated the entire model as much. It’s especially obvious when looking at the back of the models:
Next up, another round of comparisons with some taller models:
For starters, here’s my new World Eater next to Brother Arcturus Diomedes, based on a Primaris marine:
As you can see, the new CSM are not quite as tall as Primaris Marines, but they are closed (and could be used as true scale models opposite Primaris in a pinch).
And here’s a comparison with one of the wonderful converted World Eaters my buddy Augustus b’Raass sent me earlier this year:
Augustus’ model was created using older part, but it’s heavily converted and built to be taller than a standard CSM, so you barely notice the difference in height. So that’s the good news for those hobbyists with highly customised and converted chaos armies, I suppose — your guys still look good, in spite of the scale creep
Also, don’t get me wrong: Ultimately I would say the new scale is for the best — it finally gives the Chaos Space Marines the stature they deserve, because unlike their loyalist counterparts, they have skipped one or two rounds of scale creep. By the same token, however, the change is so significant that it presents a couple of challenges to chaos players now, but those can definitely be overcome. In fact, I would say that to figure out how best to use the new kits and how to work around the changes in scale seems like just the kind of creative challenge that should delight chaos players all over the world!
For now, I am pretty happy with my first test model, and I am actually looking forward to painting a couple of World Eaters again — who would have expected that, eh? Anyway, I would be happy to hear your thoughts on the new model, of course, so please leave a comment! And, as always, thanks for looking and stay tuned for more! 
