Back to the 41st millennium and the adventures of Khorne’s Eternal Hunt this week, as I get to cross another long neglected model off my list. I am referring to this gentleman here:
If you should think the model looks familiar, there are two reasons for that: On the one hand, like so many models from my collection, this guy was actually built a couple of years ago, so if you are a regular reader, chances are, you’ve run into him before.
On the other hand, he was built to actually resemble a well-known character: The model began its life as an entry for one of the frequent competitions on the – now-sadly-defunct, *sigh* – Throneofskulls forum, if I recall correctly. The objective back then was to re-imagine a non-Khornate named character as a Khornate version, and I chose Huron Blackheart, inspired by a very impressive conversion by my buddy DexterKong.
Just to remind you, here’s what stock-Huron looks like:
And here’s a closer look at my version:
It’s a fairly straightforward conversion, based on one of the Chosen models from the Dark Vengeance starter box that used to be all the rage back in the day: The Chosen body already resembled the stock Huron model a fair deal, and I liked the idea that a Khornate version of the character would be in a running pose for that extra bit of aggression.
The conversion mainly became a matter of trying to cram in most (or all) of Huron’s classic visual elements: The monstrous power-fist/-claw/flamer hybrid, the promethium tank on his back and, of course, the mangled half-augmetic face (courtesy of that one half-augmetic plastic Space Marine head everyone knows and loves). And I had to add a suitable amount of Khornate touches, hence the small icons and Khornate back banner (itself a take on the iron halo/chaos icon that adorns stock-Huron’s backpack).
I was really happy with the conversion back when I originally created it, and I still rather like it now (in fact, I was delighted to discover recently that my counts-as conversion actually managed to inspire fellow hobbyist TheChirurgeon’s own Huron kitbash). So when this year’s E Tenebrae Lux event came around over at The Bolter & Chainsword, it seemed like the perfect occasion to finally get the model painted and use it as my first vow for the event.
Since the conversion was already finished, I didn’t really have much to do before I could start painting. I only added a little pressure gauge on the back of his tank, to make the whole assembly look a bit more interesting and break up the large, plain area that is the promethium tank:
And then I vowed the model as my first contribution for the ETL event. Only it was quickly pointed out to me by fellow hobbyists Captain Semper and Atia that, technically speaking, the model was still missing a little something to represent Huron’s “Hamadrya”, his pet familiar (the ungainly thing squatting on its own base up there in the photo of the stock model, in case you were wondering).
My proper plan of action would have been to use a model from the AoS Spirit Hosts, maybe with a Bloodletter head, but I didn’t want to have to pick up a box of them, so I had to get creative. But I was not without inspiration, so I quickly tacked something together using nothing but leftover bitz:
The head is still a fairly standard Bloodletter head, whereas the spine came from the vivisected Genestealer that’s part of the 40k battlefield objective markers. My idea was for the “Almost-Hamadrya” to look like a daemonic spirit, some kind of Khornate familiar or even a half-formed Khornate Daemon, and I think the basic setup already worked pretty well. It did require a bit of additional cleanup, of course:
Now I did experiment with some shaved-down Bloodletter shoulders and arms, because I thought it might look cool to suggest the daemon only being half-formed, but it ended up looking like not much of anything at all. And just the head and spine makes it look malevolent and somewhat creepy — like a grimdark version Kaa the snake 
Ironically enough, it was this model that I actually ended up painting first.
To support the impression that this is not just a standard Bloodletter (or rather, half of a standard Bloodletter), but rather something unwholesome and half-formed, I went for an even more limited palette than the one I normally use on Khornate daemons: a mix of glossly blood and glowing ectoplasmic flesh, as the daemonic spirit is glowing with an inner malevolence…
Not bad for something that I had to come up with on the quick, if I do say so myself.
So with this complication taken care of, finally getting the counts-as Huron model painted should have been quick work, right?
Unfortunately, something happened that almost knocked all motivation to ever finish the model right out of me:
I took it along to a painting session at my friend Annie’s house, and when I arrived there, I realised his backpack was missing. Now I was transporting my models in an open crate (which I admit may be a less than optimal approach), so I figured the backpack must have fallen to the bottom of that, or been left behind in my car trunk. But it wasn’t: I searched everywhere at least for times, but no dice — the backpack didn’t turn up again. I also didn’t find it at home. So there was just one last option that gave me a sinking feeling in my stomach: I must have lost it somewhere at the side of the road when I parked my car and carried my stuff to Annie’s house, but since it was dark when we packed up for the night, there was no way to look right away, and she didn’t find anything either when she looked the next day.
And that really killed all of my motivation when it came to working on the model: I realised I would have to rebuild a backpack, but I didn’t have the exact same bitz, and even if I could come up with a replacement solution, it would always seem inferior to me than the original. Then, about a week later, I had half an hour of unexpected time, and I thought: Screw it, I am going to take one last look near where my car was parked that night. And just when I was about to abandon the stupid backpack for good, I saw something shiny near the curbstone — and there was the backpack, slightly damaged and bent out of shape (I suspect a car might even have driven over it at some point), but still salvageable — still, all’s well that ends well, I suppose. But this little episode really made me fall out of love with the model for a while there, and made the painting process less enjoyable than it should have been.
But I soldiered on and finished the job. Starting with the base colours and the first round of washes,…
…then moving on to all of those lovely little touches that actually make the process of painting enjoyable:
On a related note, that Vallejo Magic Blue has yet to let me down
So without further ado, here’s the finished model:
Here’s a detail shot to show you how the promethium tank on his back actually connects to his flamer:
That felt like such a clever bit of converting to me, back when I originally converted the model (and was also one of the reasons why I hated the idea of losing the backpack so much). Oh well…
And here’s a closer look at his axe:
Although it’s virtually impossible to see in 99.9% of all frontal shots of the model, the axe head was actually exchanged with something a little more original: the jagged axe that came with the WFB/AoS Chaos Warshrine kit.
And here is “Not-Huron”, side by side with his “Not-Hamadrya”:
And here’s the stock GW model again:
Anyway, I think he should read as a Huron counts as fairly easily, even though I have horizontally flipped the character
Oh, incidentally, the character still needs a name! So far, I only have a semi-solid idea for a background story for the character being caught in a phosphex blast during the void battles above Terra during the Heresy, having to cast himself out into the void to extinguish the phosphex flames, then being retrieved and rebuilt by his brothers. Only the sensation of the phosphex burning through his flesh never stops, but lingers as some kind of perpetual phantom pain making his every living moment a crescendo of agony. Yeah, really uplifting stuff, that…
His familar, then, is really an embodiment of his pain and rage: His agony is so palpable that it almost seems like a being of its own, a spectre that can sometimes almost be glimpsed next to him, coalescing into something that is almost solid.
Fellow hobbyist AHorriblePerson smartly suggested “Euron Hearteater” as a possible name, and it’s definitely a strong contender — still, if any of you have a cool idea, I would love to hear it!
Here’s the new model next to the World Eaters Dread and new berzerker test model I painted earlier this year:
That makes for three models painted in my tweaked recipe already, and they are starting to look pretty cool together, if I do say so myself. Being based on the Chosen models from Dark Vengeance, the model still matches the modernised CSM look — even if it’s technically just a tad shorter than the new vanilla Chaos Space Marines. They still look pretty cool together, though. And maybe adding a couple of models would be fun. In fact, the unpainted guy on the right may be a taste of things to come…
Who knows, there may just be another chaos-themed post or two waiting in the wings — just sayin’…
For now, however, I am pretty happy to have finished another long-neglected model. Plus I also think the model’s enough of a centrepiece to count as a contribution in Azazel’s Jewel of July ’19 community challenge — even though it would also be a very obvious contender for one of his frequent “Neglected models” challenges, having sat unpainted in my cupboard of shame for more than three years…
I would, of course, love to hear your thoughts on the model, so please leave a comment! And, as always, thanks for looking and stay tuned for more!
