Unboxing Malifaux – M2E Lady Justice’s ‘The Guilds Judgement’

by | Oct 4, 2013

It might be a bad time to be a Resurrectionist...


'The Guilds Judgement' box contains enough parts for six miniatures...namely Lady Justice, her Totem the Scales of Justice (3SS), The Judge (9SS) and three Death Marshals (6SS each). It also contains stat cards for each one and six upgrade cards four of which are for Lady Justice, one for The Judge and one that can be given to a model with the 'Guild Marshal' unit type.

This makes the Soulsstone value of the box...

Lady Justice (0), Scales of Justice (3), The Judge (9), Death Marshals (6, 6, 6) Total (30) or (33) with a maximum Soulstone cache and (41) with maximum 'out of the box' upgrades.

The box has two sprues in it as well as the aforementioned cards though technically I suppose it's four sprues...


Lets have a look at each of these in turn...should there be any assembly issues with any of the models then they will be listed in the appropriate section and you can view larger versions of the smaller pictures by clicking on them.

This one also comes with instructions.



Note - I'm currently without my normal lighting gear so the assembled pictures aren't great...I'll replace them with better ones if I get the opportunity.

Lady Justice.
The Sprue


Stat Card

Upgrade Cards


Assembled
The sword blade on this model ends up very close to the models face so you might want to glue it on after you've painted the face.


The Judge.
The Sprue


Stat Card

Upgrades

Assembled


Scales of Justice.
The Sprue


Stat Card

Assembled
The 'scales' part of this model have a tiny point of contact with the crosspiece which is extremely delicate. 
There's a mould line beneath each of the scales which you'll need to be careful when removing as it's easy to snap off the scales with only a small amount of pressure. The two small pieces of chain that go from the neck to the upright of the scales are quite fiddly...tweezers are helpful here...

Death Marshals
The Sprue


Stat Cards


Assembled
I've assembled these with the more human looking of the heads. The flaming skull versions are identical to those on the picture on the rear of the box and can be found at the top of this article should you wish to see them.


Thoughts and comments are (as usual) most welcome.