Just a quickie! quick and simple jungle terrain!

I bought some aquarium plants from my FLPS (Friendly Local Pet Store), picking up 2 packs of plants which totalled less than $8.  I figured they may look cool as either jungle/oasis scenery, or maybe as some scenery for an exotic alien world. So, here goes…

Step one:
These suckas are all joined together, so you’ll want to take your scalpel to them to separate them up. (Remember to cut away from yourself, kiddies!)

You’ll want to try and hack them off the base too, much easier than it sounds… I had to get a heavy duty Stanley knife to this mofo. You should then be left with the foliage, thus:

I did leave a couple of pieces on the base, although I did reduce the size of the base. This will make for some slightly higher pieces of terrain.

Step two:
Now you’ll want to get some foam board that you’ll a) have lying around or b) will go and score from the craft store for about $3 a sheet, which will last you for ages. Cut out the size of base that you want your scenery piece to be, then shave the edges at an angle to make it look more natural when you put it on your gaming surface. Don’t worry, it does’t have to be perfect, you’ll see why soon.

Then, when you have your base, glue your foliage on! Again, don’t worry too much about the weird base bits, this will be taken care of.

Step three:
This is my favorite part, the messy bit. Get your spackle (or ‘filler’ as we Brits call it) and some pumice, which is essentially sand mixed into paint, which works just as well if you don’t have access to pumice. Now liberally slap on your spackle first. Build it up where you want, like around the base of the leaves etc. I had also grabbed a couple of rocks out of the garden which I included on there too, to include a more natural feel. I brought the filler all the way up to the rocks too, to make them look buried:

I added a layer of the pumice after the filler had dried, you can see I left a ‘pathway’ through the piece to make a bit of a feature of it, and added a couple of skulls from my bitz box in there too…

Here is an example of the other piece made a little higher, more like a small outcrop of foliage:

Step four:
Paint the bastid!

Basecoat is Graveyard Earth, washed with Devlan Mud, drybrushed with Graveyard Earth>Bleached Bone>little bit of Skull White

Mud trail was basecoat Scorched Brown>Devlan Mud wash>drybrushed Scorched Brown>Scorched Brown with Bleached Bone>little bit of Bleached Bone

Now with drybrushing, and some scenic odds and sods added:

Another shot:

“be vewwy vewwy qwiet, I’m huntin’ aweiens!”

And that, dear readers, is it! you should be looking at a lovely new piece or pieces of scenery! and all for under $12!

Stay frosty

H.